BMM Industries Homepage BMM Weston Mold Machines OMSG Shot Blast Machines Contact BMM Industries

OMSG Shot Blast Machines
CAPRI
Tappeto
LAUCO
CWB
RT
Rotoflow
TRL
RBC
FAC-FX
 

 

SANDERMATIC

  • Pass-through Style Spinner Hanger Machine

  • Multiple Hook Loading System

  • Integrated Overhead Conveyor Loop

  • Accommodates Work pieces up to 59 wide by 78 high

  • Low Part Loading Threshold Height

The Sandermatic series of machines is a pass-through style machine for automatically blasting work pieces that are either directly hung onto an overhead trolley mounted hanger or positioned in a suitable fixture suspended by the overhead hanger.  Single or multiple work pieces with overall dimensions not exceeding the specifications can be blasted in batch operations.  Each machine is provided with an integrated overhead conveyor loop fitted with multiple hooks distributed at fixed distances along the conveyor loop.  During each blasting cycle, the conveyor indexes a new hook into position inside of the blast cabinet.  Loading and unloading operations are performed at the exterior hook locations during the blasting cycle.  Optionally, this overhead conveyor loop can be omitted for machine integration into an extended conveyor system.

The blast wheels are mounted on the side of the blasting cabinet at optimum angles for effectively blasting all exposed work piece surfaces.  During the shot blasting operation, the hook is indexed into two different blasting positions.  In each of these positions, the hook is rotated in front of the respective blast wheels in order to present all surfaces of the work pieces to the blast stream.

All OMSG shot blast machines include an integral abrasive recovery and cleaning system.  After passing through the blast wheel, the abrasive is collected, separated from the resulting dust and other contaminants, and then stored in a hopper, ready for reuse.  Collected contaminants are stored in a separate hopper for periodic disposal.   

All machines utilize replaceable highly wear resistant materials in critical locations.  All machine control systems are pre-piped and pre-wired.  All machine dust exhaust ports are pre-piped to a central collection point, ready to be connected to an external dust collector or optionally, a fully integrated dry cartridge type dust collector can be provided.

 

 

Model

Maximum Work Piece Diameter

Maximum Work Piece Height

Individual Hook Capacity*

Number

 of

 Hooks

Number

of Blast

Wheels

5/E

43.3 in

1,100 mm

63.0 in

1,600 mm

1,102 lbs

500 kg

5

3

5/NA

43.3 in

1,100 mm

63.0 in

1,600 mm

1,102 lbs

500 kg

7

3

5/20/A

59.1 in

1,500 mm

78.7 in

2,000 mm

1,102 lbs

500 kg

8

3

10/SA

51.2 in

1,300 mm

70.9 in

1,800 mm

2,205 lbs

1,000 kg

6

2

15/NA

59.1 in

1,500 mm

78.7 in

2,000 mm

2,205 lbs

1,000 kg

6

3

 

* Standard units are supplied with a self contained overhead conveyor loop equipped with hooks for loading and unloading work pieces and/or additional fixtures.  Optionally, units can be supplied without a conveyor for integration into a larger conveyor systems.