RT
-
Rotary Table Style
Machine
-
Special Door Design
Allows for Loading with Overhead Hoist
-
Low Part Loading
Threshold Height
-
Three Table Sizes
Available
-
Flat Floor
Installation – No Pits
The RT series of machines is a
rotary table style machine for the blasting of work pieces that are placed
directly onto the rotary table or into fixtures mounted onto the table.
Single or multiple work pieces with overall dimensions not exceeding the
specifications can be blasted in batch operations. The special shape of the
parts loading doors allow for loading and removing of heavy parts with the
aid of an overhead hoist.
Blast wheels are mounted on the
top of the blasting cabinet at an optimum angle for effectively blasting all
exposed work piece surfaces as the table rotates beneath. The machine is
designed to allow for installation on a flat floor, not requiring any pits
or pockets.
All OMSG shot blast
machines include an integral abrasive recovery and cleaning system. After
passing through the blast wheel, the abrasive is collected, separated from
the resulting dust and other contaminants, and then stored in a hopper,
ready for reuse. Collected contaminants are stored in a separate hopper for
periodic disposal.
All machines utilize
replaceable highly wear resistant materials in critical locations. All
machine control systems are pre-piped and pre-wired. All machine dust
exhaust ports are pre-piped to a central collection point, ready to be
connected to an external dust collector or optionally, a fully integrated
dry cartridge type dust collector can be provided.
|