BMM Industries Homepage BMM Weston Mold Machines OMSG Shot Blast Machines Contact BMM Industries

OMSG Shot Blast Machines
CAPRI
Sandermatic
Tappeto
CWB
RT
Rotoflow
TRL
RBC
FAC/FX
 

 

LAUCO

  • Continuous Pass-Through Tunnel Style Machine for Plate and Other Structural Components

  • Integrated Live Roller Conveyor

  • Air and Rotary Brush Abrasive Recover System at Exit

  • Accommodates Work pieces up to 78 in Width

  • Flat Floor Installation No Pits

The Lauco series of machines is a continuous pass-through tunnel type machine for automatically blasting plate and large other structural steel components placed onto a live roller conveyor.  Work pieces with overall dimensions not exceeding the specifications can be blasted in a continuous operation.  Each machine is provided with an integrated live roller conveyor for powering the work pieces beneath the blasting wheels.  The blast wheels are mounted above and below the conveyor at optimum angles for effectively blasting all exposed work piece surfaces.

The pass-through openings in the entry and exit vestibules are shrouded by wear resistant rubber curtains to limit the escape of stray abrasive.  The exit vestibule is fitted with a high pressure fan powered blowing system and a rotary brush system  for removing and recovering residual abrasive from the blasted work pieces.  Loading and unloading operations are performed on conveyor extensions located at each end of the machine.  This machine is designed to allow for installation on a flat floor, not requiring any pits or pockets.

All OMSG shot blast machines include an integral abrasive recovery and cleaning system.  After passing through the blast wheel, the abrasive is collected, separated from the resulting dust and other contaminants, and then stored in a hopper, ready for reuse.  Collected contaminants are stored in a separate hopper for periodic disposal.

All machines utilize replaceable highly wear resistant materials in critical locations.  All machine control systems are pre-piped and pre-wired.  All machine dust exhaust ports are pre-piped to a central collection point, ready to be connected to an external dust collector or optionally, a fully integrated dry cartridge type dust collector can be provided.

 

 

Model

Maximum Work Piece Width

Maximum Work Piece Height

Minimum Work Piece Length

Number

 of

 Blast Wheels

Optional Integrated Dust Collector

60/FAC

23.6 in

600 mm

11.8 in

300 mm

78.7 in

2,000 mm

4

Yes

100/N

39.4 in

1,000 mm

15.7 in

400 mm

59.1 in

1,500 mm

4

No

150/NP

59.1 in

1,500 mm

19.7 in

500 mm

59.1 in

1,500 mm

4

No

150/H

59.1 in

1,500 mm

39.4 in

1,000 mm

59.1 in

1,500 mm

4

No

200/NS

78.7 in

2,000 mm

19.7 in

500 mm

59.1 in

1,500 mm

4/6

No

250 NS

98.4 in

2,500 mm

19.7 in

500 mm

98.4 in

2,500 mm

6/8

No

300 NS

118.1 in

3,000 mm

19.7 in

500 mm

98.4 in

2,500 mm

8

No

1500/NS

59.1 in

1,500 mm

19.7 in

500 mm

59.1 in

1,500 mm

4

No

1500/HNS

59.1 in

1,500 mm

39.4 in

1,000 mm

59.1 in

1,500 mm

4

No

3000 NS

118.1 in

3,000 mm

19.7 in

500 mm

98.4 in

2,500 mm

8

No